Kt Kingtronics Specifying in Quartz Crystal

25 Mar 2011

Variable Electrical parameters are those that the Design Engineer must specify when selecting a Quartz Crystal device for any particular application.

1. Package Type: Will the package be Through Hole or Surface Mount, and are there size constraints with either.

2. Frequency

3. Load Capacitance: The specified Load Capacitance is dependent on the Resonance Mode required in the application . For Series resonance, no Load Capacitance is required. For Parallel Resonance, the Load Capacitance specified by the Design Engineer will be used to calibrate the Quartz Crystal thereby effecting the major operating characteristics of the device, including initial Frequency Tolerance.

4. Frequency Tolerance: At 25 degree Celsius, an amount of initial frequency deviation acceptable for the application is required. Tighter specifications of Frequency Tolerance lower yield in Quartz Crystal Blank production thereby serving to increase production costs.

5. Stability: Over the Operating Temperature Range, an amount of total deviation acceptable for the application. Tighter specifications of Stability lower yield in Quartz Crystal Blank production thereby serving to increase production costs.

6. Operating Temperature: Standard Operating Temperature ranges are generally considered as -20-+70 degrees Celsius (considered "commercial" Operating Temperature), and -40-+85 degrees Celsius (considered "Industrial" Operating Temperature) Other Operating temperature ranges are available and should be specified.

  • Articles related:

0Commentary - Kt Kingtronics Specifying in Quartz Crystal

Post comment

◎welcome to give out your point。

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Categories

Archives

Calendar