Kt Kingtronics Terms Explanation of Gas Discharge Tube

13 Feb 2018

DC spark-over voltage:The voltage at which the ceramic gas discharge tube sparks over with gradully increasing DC voltage.

Impulse spark-over voltage: The highest voltage at which the ceramic gas discharge tube sparks over with given ware-shape at a rise speed 1000V/μs, and it is also called as “pulse voltage".

Holdover voltages : The maximum DC voltage across the terminals of a ceramic gas discharge tube under which it may be expected to clear and to return to the high impedance state after the passage of a surge, under specified circuit conditions.

Alternating discharge current : The r.m.s. value of an approximately sinusoidal alternating current passing through the ceramic gas discharge tube.

Impulse discharge current: The peak value of the impulse current passing through the ceramic gas discharge tube, and it is also called as pulse discharge current or surge discharge current, including 10/1000μs long-wave discharge current and 8/20μs short-wave discharge current.

Insulation resistance:DC resistance of the gas discharge tube under specified conditions. Test voltage must be lower than DC spark-over voltage.

Inter-electrode capacitance : The capacitance between any two electrodes in the gas discharge tube. Its value is mainly determined by the size of electrode and distance between electrodes. In addition, the capacitance is also related to the lead wire length, spacing and dielectric in the ceramic gas discharge tube.

0Commentary - Kt Kingtronics Terms Explanation of Gas Discharge Tube

Post comment

◎welcome to give out your point。

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Categories

Archives

Calendar