Did your suppliers of aluminum electrolytic capacitors inform that price and L/T will increase much more in near future?

Kingtronics can offer you stable price and shorter L/T than those top suppliers as below. Our lead time is only about 5-9 weeks

We can also discuss more at Electronica 2018 in Munich. Do you have plan for it?

Technology Manufacturer Lead-Times Lead-Times Trend Comments
Electrolytic Capacitors NIC Components 18-20 Increasing L/T pushed out. Some pricing has been increased. Pushouts some cases 40 weeks
Nichion 18-28 Stable SMD 10x10,8x10,6.3x7.7 L/T coming down now between 18-24, Snap-in still 28-30, price increases happening
Surge 14-19 Increasing Lead-times pushing out closing on 20 weeks on some products
Panasonic 14-18 Decreasing Some SMD dropping from 18 to 16 weeks. Some price increases.
United Chemicon 16-20 Increasing L/T increasing the 18-20 weeks

1.Wide range of using in lighting equipment (LED equipment), automotive electronics, intelligent products, automation equipment and so on.

2. Energy products: large industrial power supply, aviation military communications.

3. Office equipment/network communication apparatus: credit card machine, fax machine, iPod

4. Industrial instrumentation: power regulators, professional power supplies

5. White goods: audio apparatus, TV sets, VCRs, washing machine 

6. Automotive equipment: head-up display, AV system , digital driving recorder

7. Medical equipment: sphygmomanometer, ECG equipment, handheld electronic blood glucose meter

Supplier Company: Kingtronics International Company www.kingtronics.com
ISO 9001: 2015 manufacturer, 2 factories, ISO & UL & SGS certified.

1.Frequency converters,solar inverters,aviation military communications, uninterruptible power supplies,professional power supplies,medical appliances,white goods,wind power converters
2. General industrial electronics ,for switch-mode power supplies in professional equipment
3. High-reliability equipment in automotive power electronics, applications with highest ripple current load at high frequencies
4. General purpose, AC / Motor, Power, lighting, medical equipment, air conditioner, high voltage, automobile, charger, adapter, ballast

Supplier Company: Kingtronics International Company www.kingtronics.com
ISO 9001: 2015 manufacturer, 2 factories, ISO & UL & SGS certified. 

1.Automotive electronics: air conditioning system, head-up display, AV system, car battery management system, digital driving recorder

2.General purpose and industrial, automotive, telecommunication, audio-video

3.Coupling, decoupling, timing, smoothing, filtering, buffering in SMPS

4.Boards with restricted mounting height, vibration, and shock resistant

Supplier Company: Kingtronics International Company www.kingtronics.com
ISO 9001: 2015 manufacturer, 2 factories, ISO & UL & SGS certified. 

1.For the operating of electronic devices like telecommunication equipment, audio devices, office devices, communication devices, measuring instruments, TVs, video recorders, automotive sets, security instrumentation ,etc

2.For use in output circuits of switch-mode power supplies of compact design 

3. Automotive electronics (piezo injection, DC-link converters) 

4. High-reliability equipment in industrial electronics

5.Professional power supplies and UPS, medical applications, professional photoflash units

Supplier Company: Kingtronics International Company www.kingtronics.com
ISO 9001: 2015 manufacturer, 2 factories, ISO & UL & SGS certified. 

Kingtronics produce and sell a wide variety of Aluminum Electrolytic Capacitors with long life, low Impedance and excellent performance options. 

Welcome your inquiry for more information. 

Catalogue: 
http://www.kingtronics.com/pdf/Kingtronics-Aluminum-Electrolytic-Capacitors-Catalog.pdf

Product Video: 
https://www.youtube.com/watch?v=dOTQpigQKgc

*Load Life: 1000Hr ~10000Hr
*Operating temperatures: 85°C, 105°C, 130°C
*Capacitance: 3.3uF - 22000uF
*Voltage range: 6.3 ~ 160 WV
*ISO/RoHS certified quality
Axial Type, Radial Type, SMD Chip Type, Snap-in Type, Screw Type and Lug Type
*Package: Ammo, Bulk, Tape & Reel 

It’s our pleasure to share with you our one more popluar production line for aluminum electrolytic capacitors: axial type. Hoping to serve your business better! 

If you have any related demand, never feel hesitated to send your inquiries to us! ^^
To get more information via link: 
http://www.kingtronics.com/aluminum-electrolytic-capacitors/

GKT-AL 85°C 2000H Axial Aluminum Ele. Capacitors Low Leakage Features
Low Leakage Current, 2 Rubber Type
ISO/RoHS certified quality
Long load life: 85℃ 2000 hours assured
Operating temperature range: -40℃~+85℃
Wide range capacitance: 3.3uF - 22000uF
Voltage range :6.3 ~ 160 WV
Various dimensions: 8*16mm ~ 25*53mm

GKT-AV 85°C 2000H Axial Aluminum Electrolytic Capacitors Standard Features
Low Voltage, 2 Rubber Type
ISO/RoHS certified quality
Long load life: 85℃ 2000 hours assured
Operating temperature range: -40℃~+85℃
Wide range capacitance: 3.3uF - 22000uF
Voltage range :6.3 ~ 160 WV
Various dimensions: 8*16mm ~ 25*53mm

 I wish to share a positive news with you here !

Our team just received an order with USD100k for Aluminum E-caps from Indian customer.

The usage for Aluminum E-caps is really big. They can be used in LED, Lighting Tech, power supply, Custom, Adapters, Front End, POE, Open Frame, Capacitor Chargers, DC to DC, Compact PCI, Micro TCA, Military……

Everyone in this field know, Indian market is very competitive. Kingtronics parts and prices can be acknowledged by Indian market.

I believe you will be also satisfied with our offer !

Please feel free to share your inquiry for Aluminum Electrolytic Capacitor.

We, Kingtronics, have to say that we cannot be successful without every customer support. It’s always a great pleasure for us to serve your business. 

Instead of pricing, we’re more focusing on our quality for product, our service for your business. Whenever you give us your positive feedback, it’s worth for everything! ^^

However, dear valued customers, if you still have no idea to inquire our GKT- Aluminum electrolytic capacitor, please refer to below, there is simple feature of value for your reference, also could have datasheet via link.

Or, you could just send your requirements, let us check our best offer for directly!

Radial Type

**Standard Product
GKT-GS 85C 2000H
GKT-GT 105C 2000H

**Long Life
GKT-GZ 105C 6000-10000H
GKT-GR 105C 3000-6000H
GKT-GL 105C 5000H
GKT-GE 130C 5000H

**Long Life & Miniaturized
GKT-GQ 105C 4000-10000H
GKT-GD 105C 3000-6000H
GKT-GF 105C 5000H

**Low Impedance
GKT-GH 105C 2000H
GKT-GW 105C 2000H
GKT-GU 105C 3000H

When using Aluminum Electrolytic Capacitors, please observe the following points to ensure optimum capacitor performance and long life.

1>DC electrolytic capacitors are polarized.

Make sure of the polarity which is marked on the body of the capacitor.  
Application of the reversed voltage may cause a short circuit or damage to the capacitor.  
Use bipolar capacitors when the polarity is not determined or unknown.  
Note that DC electrolytic capacitors CAN NOT be used for AC application.

2>Bipolar capacitors
These capacitors are used only in pulse circuits as well as polarity reverse circuits, but not applicable in pure AC or high ripple current. 

3>Do not apply voltage greater than the rated voltage
If a voltage exceeding the rated voltage is applied, the leakage current will increase, which will damage the capacitor.  
Recommended working voltage is 70% - 80% of rated voltage.  
Using capacitors at recommended working voltage prolongs capacitor life.

4>Do not allow excessive ripple current through the capacitor
The flow of ripple current greater than the permissible (rated) value will cause heating of the capacitor, which may decrease the capacitance and damage the capacitor.
Ripple current through the capacitor must be at or below the allowable level, generally not more than 80% of the rated current.

5>Use specially designed capacitors for the circuits where charge and discharge are frequently repeated.
In circuits subjected to rapid charge and discharge cycles, a capacitor may be damaged and its life may be shortened by capacitance decrease at higher temperature.  

6. Operating temperature range.

The characteristics of capacitors change with the operating temperature.  
The capacitance and leakage current increase and dissipation factor will decrease at higher temperatures. Usage at lower temperature will ensure longer life.

7. Temperature vs. Life.

The expected life of a capacitor is related to its ambient temperature. 
Generally, if the ambient temperature is reduced 10℃, life is doubled at rated voltage. 

8. Check operating frequency.

Electrolytes usually have their capacitance measured at 100 Hz. or 120 Hz.  
However, remember that capacitance decreases and dissipation factor increase as the applied frequency becomes higher.

9. Capacitor Storage

Long periods of storage have virtually no effect on a capacitor’s capacitance and dissipation factor. 
However, such periods can increase leakage current and decrease the capacitors withstand voltage. 
Apply rated DC voltage treatment to the capacitors which have been stored for a long time.

10. The capacitor case is not insulated from the cathode terminal.

The capacitor’s case and cathode terminal connect through the electrolyte. 
If the case is to be completely insulated, that insulation must be at the capacitor’s mounting point.

11. Do not apply excessive force to the terminals and leads.

An excessively strong force applied to the terminals and lead wires may cause leads to break or terminals to separate and, in turn, cause the internal contact to fail.

12. Cleaning of the circuit board after solder dipping.

Clean circuit boards to remove flux or other extraneous matter.  
To ensure protection for the sleeve, its marking, and the capacitor's sealing materials, the capacitor should never be washed or cleaned by halogenous agents or solvents such as trichlorethylene, xylene, acetone, etc. 
Recommended cleaning solvents; Methanol, isopropanol ethanol, isobutene, petroleum ether, propanol and/ or commercial detergents.

13. Be cautious of the temperature and duration when soldering.
Soldering irons should be kept away from vinyl-insulated sleeves of capacitor.  
When the capacitor is dipped in a solder bath, use at less than 260℃ and 10 seconds to avoid damaging the capacitor.

14. Hole positions on the circuit board.
When designing a circuit board, space the through-holes equal to the space between the capacitor's lead wires. 
If the spacing is either greater than or less than the capacitor's leads, mounting will apply stress to the leads, causing short circuits, broken circuits, and increased current.
Also, through-holes on the circuit board as well as lead holes of post-process parts can result in solder splashing onto the vinyl sleeve causing damage.  
Consider hole positions carefully.

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
Chip EXPO 2017
Chip EXPO 2017
"Expocentre" Moscow Russia
Date: Oct 31 - Nov 2nd, 2017
Booth No.: B 20

Meet Kingtronics in Munich soon
Electronica 2018
Electronica 2018
New Munich Trade Fair Centre, Germany
Date: 13-16 November, 2018
Booth No.: To be advised

Calendar

<< 2018-7 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31