We are glad to share a piece of good news with Kingtronics faithful customers. Kingtronics offers the latest packing for SMD Diodes and Rectifiers at the middle of 2016.

Taking a look at it, we change the colorful carton for packing products which brings more benefits. It not only more attractive and professional, but also shows more information of our products on it, which can help you clearly understand what Kingtronics are manufacturing. We think you will be interested in this new packing.

The below models are suitable for this new packing.
SMA, SMA-J, SMAF, SMB, SMB-J, SMBF, SMC, SOD123FL, ABS, MBS, MBF 
See more about Kingtronics Diodes and Rectifiers information, please check below links:
http://www.kingtronics.com/diodes-rectifiers

1, ESR Equivalent series resistance: Electrolytic capacitors are often used in circuits where current levels are relatively high. Also under some circumstances and current sourced from them needs to have a low source impedance, for example when the capacitor is being used in a power supply circuit as a reservoir capacitor. Under these conditions it is necessary to consult the manufacturers datasheets to discover whether the electrolytic capacitor chosen will meet the requirements for the circuit. If the ESR is high, then it will not be able to deliver the required amount of current in the circuit, without a voltage drop resulting from the ESR which will be seen as a source resistance.

2, Frequency response: One of the problems with electrolytic capacitors is that they have a limited frequency response. It is found that their ESR rises with frequency and this generally limits their use to frequencies below about 100 kHz. This is particularly true for large capacitors, and even the smaller electrolytic capacitors should not be relied upon at high frequencies. To gain exact details it is necessary to consult the manufacturers data for a given part.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GH-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

Good news!!!

Do you need Bridge MB1S-MB10S? Are you looking for supplier who can offer bridge with both excellent quality and competitive price?

Kingtronics is the manufacturer who you are looking for!

We have amazing low price for Bridge MB1S-MB10S now.

Why don't you take this opportunity to send us your inquiry and let's help you cost down?

Just take action right now!

Kingtronics Aluminum electrolytic capacitors are used in virtually every segment of the electronics industry, such as VTRs, videos, cameras, car radios and micro cassette tape recorders, etc.The longer lead is positive electrode and the shorter one is negative electrode.

General purpose and can be used in Industrial. Aluminum electrolytic capacitors are widely used to provide temporary voltage hold-up (they act as short-term energy sources) during transition periods (high load, line droops, and transient events).

Aluminum electrolytic capacitors are widely used to provide temporary voltage hold-up (they act as short-term energy sources) during transition periods (high load, line droops, transient events) within most electrical circuits.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GL-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

(1) Kt GKT-GS is super miniaturized and high reliability, Kt GKT-GT is high Temperature, Kt GKT-GL is long life, Kt GKT-GH is low impedance and high ripple current.

(2) Kingtronics Radial Aluminum Electrolytic Capacitors are Space and cost savings.

(3) RoHS compliantRoHS directive (2011/65/EU), which meet RoHS 2.0.

(4) Kt Radial Aluminum Electrolytic Capacitors Pb free reflow soldering compliant.

For more products information please check:
http://www.kingtronics.com/pdf/GKT-SS-85C-Snap-in-Aluminum-Electrolytic-Capacitors.pdf

Aluminum Electrolytic Capacitor, simply called Eelectrolytic Capacitor (e-cap), is a type of capacitor that uses electrolyte to achieve larger capacitance than other capacitor types. It consists of cathode aluminum foil, electrolytic paper, electrolyte, and aluminum oxide film, which acts as the dielectric, formed on the anode foil surface.

Due to its large capacitance, Aluminum Electrolytic Capacitor is suitable for passing or bypassing low frequency signals and storing large amounts of energy. It widely be used in power supplies and for decoupling unwanted AC components from DC power connections.

Kingtronics produce Aluminum Electrolytic Capacitor for many years. We sold this product in China and Hong Kong before. Because of good price and quality, we have much success in this item. Now we start offering this product to our oversea customers.

Kingtronics Aluminum Electrolytic Capacitors features in breif:

● long life, low Impedance and excellent performance options|
● Type: radial type, snap-in type
● Rated Voltage (V): 6.3V, 10V, 16V, 25V, 35V, 50V, 63V, 80V, 100V, 160V, 200V, 220V, 250V, 350V, 400V, 420V, 450V
● Operating temperatures up to 150°C

Datasheet:
Aluminum Electrolytic Capacitors - Radial Type
GKT-GS   http://www.kingtronics.com/pdf/GKT-GS-85C-Radial-Aluminum-Electrolytic-Capacitors.pdf
GKT-GT   http://www.kingtronics.com/pdf/GKT-GT-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf 
GKT-GH  http://www.kingtronics.com/pdf/GKT-GH-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf
GKT-GL   http://www.kingtronics.com/pdf/GKT-GL-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

Aluminum Electrolytic Capacitors - Snap-in Type
GKT-SS   http://www.kingtronics.com/pdf/GKT-SS.pdf
GKT-ST   http://www.kingtronics.com/pdf/GKT-ST.pdf

For more information, welcome contact and send your inquiry to us. : )
info@kingtronics.com

Before using our Kingtronics Radial Aluminum Electrolytic Capacitors, please carefully browse the catalog or product specifications. Then use them within the performance limits’ prescribed. It should not be used where electrical insulation is required.
Connecting with the wrong polarity will short-circuit or damage the capacitor with the pressure relief vent opening early on.

Do not apply a high temperature that exceeds the upper limit of the category range specified for the capacitors. Do not use capacitors in circuits intended for rapid charge and discharge cycle operations.

These products are not intended for use in the following special conditions.
(1) In liquid, such as Water,Oil,Chemicals or Organic solvent.
(2) In direct sunlight, outdoors, or in dust.
(3) In an environment where strong static electricity or electromagnetic waves exist.
(4) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these products.
(5) Using in the atmosphere which strays Acid or alkaline.
(6) Using in the atmosphere which there are excessive vibration and shock.

For more products information please check:
http://www.kingtronics.com/pdf/GKT-ST-105C-Snap-in-Aluminum-Electrolytic-Capacitors.pdf

Surge arresters are classical components for protecting the installations of the telecommunications. It is essential that IT and telecommunications systems -with their high-grade but sensitive electronic circuits – be protected by arresters. They are thus fitted at the input of the power supply system together with varistors and at the connection points to telecommunication lines. They have become equally indispensable for protecting base stations in mobile telephone systems as well as extensive cable television (CATV) networks with their repeaters and distribution systems.

These protective components are also indispensable in other sectors:
● In AC power transmission systems, they are often used with current-limiting varistors
● In customer premises equipment such as DSL modems,WLAN routers, TV sets and cable modems
● In air-conditioning equipment
The integral black-box concept offers graduated protection by combining arresters with varistors, PTC thermistors, diodes and inductors to create an ideal solution for many applications.

What's cooperation? It is a process of groups working or acting together for common or mutual benefit. Based on the accumulated reputation and experience in the market, we have much confidence to increase your margin, especially on below diodes, it even helps you expand some business.

Most of us prefer cultivate relationships before do business together, please never hesitate to call or email us for any component demands, various cooperation methods can be supported.

Diode

packing

Diode

packing

M1-M7, SMD IN400

SMA

ES1A-ES1G

SMA

RS1A-RS1M

SMA

ES3A-ES3J

SMC

US1A-US1M

SMA

SS22A-SS26A

SMA

ES1A-ES1J

SMA

SS32A-SS36A

SMA

SS12-SS14

SMA

SS22-SS26

SMB

SMAJ5.0CA~220CA

SMA

SS32B-SS36B

SMB

SMBJ5.0CA~220CA

SMB

SS52B-SS56B

SMB

SMAJ250CA~440CA

SMA

SS32-SS36

SMC

SMBJ250CA~440CA

SMB

SS52-SS56

SMC

GS2A-GS2J

SMB

MB10F

MBF

GS3A-GS3J

SMC

GS2K-GS2M

SMB

GS3K-GS3M

SMC

ES2A-ES2J

SMB

Surge Arresters Key characteristics:
● DC spark-over voltage : 70 to 6000 V
● Impulse discharge current (8/20 μs) : max. 100 kA
● Impulse discharge current (10/350 μs) : max. 100 kA
● Alternating discharge current (1 s) : max. 20 A
● Alternating discharge current (0.2 s) : max. 300 A
● Arc voltage: 10 to 35 V
● Insulation resistance: min. 1 GΩ
● Capacitance: min. 0.2 pF

Kingtronics sell 2-Electrode arresters and 3-Electrode arresters. Surge arresters are designed to protect electrical equipment from damaging effects of spikes and transients caused by lightning, utility switching, isolation arcing, electrical motor cycling, or any other sudden change in electrical power flow on incoming AC power lines.

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar

<< 2024-3 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31