Kingtronics Blog

With the business growing demand of our company's performance, in order to give our customers better service, our company expand the positions for sales recruitment. Hope our improvement can make you more satisfied with our after-sales service.

Thank you very much for all of our customers' great support all the way. Wish all of us a wider future with sustainable development.

Kindly pls pay attention to our further notice on 2016 exhibition in Munich, Germany!

Resistance Element :
A continuous, unbroken length of resistive material without joints, bonds or welds except at the junction of the element and the electrical terminals connected to each end of the element or at an intermediate point such as a center tap.

Adjustment Shaft :
The mechanical input member of a trimming potentiometer which when actuated causes the wiper to traverse the resistance element resulting in a change in output voltage or resistance.

Single Turn Adjustment :
Requires 360° or less mechanical input to cause the wiper to traverse the total resistance element.

For more products information please check: http://www.kingtronics.com/trimming-potentiometers/

You may have received our Kingtronics Christmas Cards in the past few years, with appreciation for your business,so we would like to make something special this year,haha.O(∩_∩)O~

Pls see below photos about our Kingtronics 2015 Chrismas Cards.It is designed and made by ourselves.When you receive our cards, hoping you will like it.

Our wishes come to you with the flying snow and this Christmas Card. May you be happy at Christmas and always.

For more products information please check: http://www.kingtronics.com/

Trimming Potentiometers:
An electrical mechanical device with three terminals. Two terminals are connected to the ends of a resistive element and one terminal is connected to a movable conductive contact which slides over the element, thus allowing the input voltage to be divided as a function of the mechanical input. It can function as either a voltage divider or rheostat.

Wirewound Trimming Potentiometer:
A trimming potentiometer characterized by a resistance element made up of turns of wire on which the wiper contacts only a small portion of each turn.

Non- Wirewound Trimming Potentiometer:
A trimming potentiometer characterized by the continuous nature of the surface area of the resistance element to be contacted. Contact is maintained over a continuous, unbroken path. The resistance is achieved by using material compositions other than wire such as carbon, conductive plastic, metal film and cermet.

For more products information please check：http://www.kingtronics.com/trimming-potentiometers/

Power management refers to how to effectively allocated to the power supply system of different components. Power management is very important to rely on battery power of mobile devices. Power management technology also called power control technology. It belongs to the category of power electronic technology. Nowadays it has been widely applied to industry, energy, transportation, information, aerospace, defense, education, culture, and many other fields.

Our diodes and bridge rectifiers can be used for power management. 
For more products information please check: http://www.kingtronics.com/bridge-rectifiers/

The combination of proprietary cermet element technology, precious metal brush contacts and swaged pin element connections used in BI trimmers permits the manufacture of precision, high quality trimmers that span the resistance range from 10 ohms to over 5 megohms. The small size and planar construction of these trimmers minimize stray circuit reactances and permit the trimmers to perform well in many high frequency applications.

Leadscrew
Precision brass leadscrew cuts its own grooves in the teflon rotor so that the operation of the rotor is free of backlash. Setability is excellent.

Sealing Grooves
Leadscrew has specially cut grooves to ensure a watertight seal.

Ceramic Substrate
High density substrate provides an excellent base for the element and is a good conductor of heat.

Cermet Element
BI’s proprietary cermet element matches the materials in the wirebrush so that CRV is minimized and the high temperature setability is excellent.

Swaged Pins
BI’s pin connections, which are swaged to the substrate, are free of solder and maintain high conductivity with time and temperature cycling.

Learn more: http://kingtronics.com/

Generally bridge rectifier is divided into full-bridge and half-bridge.

Half-bridge : Two half-bridge is a half bridge rectifier diodes sealing together. Two half-bridge circuit can be composed of a bridge rectifier. 

A half bridge may be composed of a transformer with a center tap full-wave rectifier circuit.

Full-bridge : Formed by full-wave bridge rectifier circuit connected by four rectifier diodes, and packaged as one composed of external insulation packaging.

In addition , Bridge Rectifier Package category: SMD series, Bridge series, Round Bridge Series, Flat bridge series, Square Bridge Series.

Kingtronics is one of the oldest professional manufacturers in China with ISO 9001: 2008. 

Our diodes and transistors are used widely in alarm, automotive, communications, power meter, ballast construction, terminal block, automobile electronics, TV, cash registers... 

Here share a summer news with you:

Our kingtronics can deliver below hot sellers within 2 weeks if qty under 200Kpcs if regular stock available. Kindly pls share it with your sales. Let's win more orders together.

Diode Rectifier: Diode M7 SMA (keep regular stock), LL4148 Minimelf, 1N4148W, 1N4148WS, BAV70, BAV99

Switching Diode: LL4148 Minimelf T&R RoHS, 1N4148W SOD-123 T&R RoHS, 1N4148WS SOD-323 T&R RoHS,  BAV70 SOT-23 T&R RoHS, BAV99 SOT-23 T&R RoHS

Transistor (SOT-23 T&R RoHS): BC846B/ BC807/ BC817-40 / BC846B/ BC847B/C / BC857C, MMBT3904/MMBT3906,MMBT8050C/D,MMBT8550C/D,MMBT9013H,MMBT9014C/D, MMBT9018H, 
MMBT8050C/D, MMBT8550C/D, MMBT945L/O/P/Y

Usually the bridge rectifier named in three or four digits, the first or first two number represents the rated current, the latter two figures represent the rated voltage (digital * 100V)

KBL407 : KBL = package; IR (current) = 4A; VRRM (voltage) = 700V.
KBPC2510 : KBPC = package; IR (current) = 25A; VRRM (voltage) = 1000V.

Definition: Kingtronics TKT--dipped tantalum capacitor, also called radial tantalum capacitors, or tantalum bead capacitors. 

Specification: capacitance value, capacitance tolerance, capacitors voltage, pitch size, package

Datasheet: http://www.kingtronics.com/pdf/dipped-tantalum-capacitors.pdf

Application: TV sets, camcorders, computers, program-controlled electronic telephone switching systems, telephones, instruments and meters...

Pakage: Bulk & Ammo Tape in Box (Ammo Taped). 

pitch size: 2.54mm & 5.08mm

Certification: ISO 9001:2008 & SGS & RoHS

Output: 9kkpcs/mth

Cross ref: