Kingtroncis all kinds of aluminum electrolytic capacitors(Kt SMD E Cap) are available, GKT-VL series AEC-Q200 capable surface mount aluminum electrolytic capacitors feature high heat resistance of 105ºC.They are possession of beautiful “Kt” or”K” mark and high quality as well.

Features:
Designed for surface mounting on high density circuit board
ISO/RoHS certified quality
Long load life: 3000-5000H
Operating temperature range: -55℃~+105℃
Wide range capacitance: 0.1uF - 1500uF
Voltage range: 6.3V - 100V.DC
Various dimensions: 4*5.4mm - 16*16.5mm
Comply with the RoHS directive

This type of Kt SMD Ecap can be found in power supplies, Industrial Welding Machines, Variable Frequency Speed Controller; PC Machine Power Supplies, Industrial Power Supplies; High Advanced Power Supplier, Power Socket; Road Lamp; LED Power Device, LED Driver, LED Lamp, LED Lighting; Power Meters, Energy Meters, General purpose.
Kindly please check more items and datasheet from below links:
http://www.kingtronics.com/pdf/GKT-VL-105C-SMD-Aluminum-Electrolytic-Capacitors.pdf

Kingtroncis GKT-VK is a SMD Aluminum Electrolytic Capacitor(Kt SMD E Cap) with black print and "KtK" or "KK"mark on the case top. The GKT-VK series capacitor is designed for surface mounting on high density PC board. Applicable to emboss carrier tape packing system is available for automatic insertion.

Features:
Designed for surface mounting on high density circuit board
ISO/RoHS certified quality
Long load life: 3000H
Extra low impedance with temperature range: -55℃~+105℃
Impedance 40~60% less than GKT-VZ series
Wide range capacitance: 4.7uF - 4700uF
Voltage range: 6.3V - 50V.DC
Various dimensions: 4*5.4mm - 16*16.5mm

This series can be found in Telecommunications, General Industrial, EDP, Portable and Lightweight Equipment. The SMD technology is also used in Coupling, Decoupling, and Smoothing, Filtering, Buffering.
Kindly please check more items and datasheet from below links:
http://www.kingtronics.com/pdf/GKT-VK-105C-SMD-Aluminum-Electrolytic-Capacitors.pdf

CONTACT RESISTANCE VARIATION: (CRV)
The apparent resistance seen between the wiper and the resistance element when the wiper is energized with a specified current and moved over the adjustment travel in either direction at a constant speed. The output variations are measured over a specified frequency bandwidth, exclusive of the effects due to roll-on or roll-off of the terminations and is expressed in ohms or % of Rt.

EQUIVALENT NOISE RESISTANCE: (ENR)

(Wirewound only) Any spurious variation in the electrical output not present in the input, defined quantitatively in terms of an equivalent parasitic, transient resistance in ohms, appearing between the contact and the resistive element when the shaft is rotated or translated. The Equivalent Noise Resistance is defined independently of the resolution, functional characteristics and the total travel. The magnitude of the Equivalent Noise Resistance is the maximum departure from a specific reference line. The wiper of the potentiometer is required to be excited by a specific current and moved at a specific speed.

RESISTANCE-TEMPERATURE CHARACTERISTIC: (RTC)
The difference between the total resistance values measured at a reference temperature of 25°C and the specified test temperature expressed as a percent of the Total Resistance.
Where:
R1 = Resistance at reference temperature (25°C) in ohms
R2 = Resistance at the test temperature in ohms

TOTAL RESISTANCE: (Rt)
The dc resistance between the input terminals with the wiper positioned to either end stop, or in dead band for continuous rotation potentiometers.

ABSOLUTE MINIMUM RESISTANCE: (Rm)

The resistance measured between the wiper terminal and each end terminal with the wiper positioned to give a minimum value.

END RESISTANCE: (Re)

The resistance measured between the wiper terminal and an end terminal when the wiper is positioned at the corresponding end of mechanical travel.
Absolute minimum resistance and end resistance are synonymous for continuous rotation trimmers.

TEMPERATURE COEFFICIENT OF RESISTANCE: (TC)

The unit change in resistance per degree celsius change from a reference temperature, expressed in parts per million per degree celsius as follows:



Where:
R1 = Resistance at reference temperature in ohms
R2 = Resistance at test temperature in ohms
T1 = Reference temperature in degrees celsius
T2 = Test temperature in degrees Celsius

The fundamental electrical properties of multilayer ceramic capacitors are as follows:

Polarity: Multilayer ceramic capacitors are not polar, and may be used with DC voltage applied in either direction.

Rated Voltage: This term refers to the maximum con tinuous DC working voltage permissible across the entire operating temperature range. Multilayer ceramic capacitors are not extremely sensitive to voltage, and brief applications of voltage above rated will not result in immediate failure. However, reliability will be reduced by exposure to sustained voltages above rated.

Like all other practical capacitors, multilayer ceramic capacitors also have resistance and inductance. A simplified schematic for the equivalent circuit is shown in Figure 1. Other significant electrical characteristics resulting from these additional properties are as follows:

Impedance: Since the parallel resistance (Rp) normally very high, the total impedance of the capacitor is :

The variation of a capacitor’s impedance with frequency determines its effectiveness in many applications.

A typical surge arrester consists of disks of zinc oxide material sized in cross-sectional area to provide desired energy discharge capability, and in axial length proportional to the voltage capability. The disks are then placed in porcelain enclosures to provide physical support and heat removal, and sealed for isolation from contamination in the electrical environment.

Kingtronics specialized in 2-Electrode Surge Arresters.We have many different types of Surge Arresters , please send your enquiry for our KT mark SKT-2R-230A2.

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
electronicAsia-2019
electronicAsia-2019
Convention and Exhibition Centre,HongKong
Date: 13-16 October, 2019
Booth No.: 5G-C26

Meet Kingtronics in Munich soon
electronica-2020
Electronica-2020
New Munich Trade Fair Centre, Germany
Date: 10-13 November, 2020
Booth No.: To be advised

Archives

Calendar

<< 2019-7 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31