Kingtronics produces high-quality Capacitors and sells around the world, GKT-GN Radial Aluminum Electrolytic Capacitor is one of the bestsellers with competitive price, the only different characteristic- non-polarized, used in polarity reverse and change circuits. Here are some details about GKT-GN Radial Lead type E Cap.

Features of GKT-GN Radial Through-hole Aluminum Electrolytic Capacitors:
Various dimensions: 5*11mm - 19*35mm
Long load life: 1000Hrs
ISO/RoHS certified quality

Specification of GKT-GN Radial Through-hole Aluminum Electrolytic Capacitors:
Operating temperature range: -40℃~+85℃
Voltage range: 6.3Vdc-160Vdc,
Wide range capacitance: 0.47uF - 6800uF

What are you waiting for? Come and place an order with us, you’ll never regret it! More information please visit Kingtronics website: 
http://www.kingtronics.com/aluminum-electrolytic-capacitors/GKT-GN-85C-Radial-Aluminum-Electrolytic-Capacitors.html

1>Aluminum electrolytic capacitors are divided into three subfamilies by the type of electrolyte:
· Non-Solid (liquid, wet) aluminum electrolytic capacitors 
· Solid manganese dioxide aluminum electrolytic capacitors 
· Solid polymer aluminum electrolytic capacitors.

Aluminum electrolytic capacitors with non-solid electrolyte are available in different styles, see pictures above from left to right:
· SMDs (V-chip) for surface mounting on printed circuit boards or substrates 
· Radial lead terminals (single ended) for vertical mounting on printed circuit boards 
· Radial pin terminals (snap-in) for power applications 

2>Production process:


3>Cathode &  Anode mark:


4>Electrolytic capacitors family tree:

An aluminum electrolytic capacitor, also named electrolytic capacitor (E-cap), is a capacitor whose anode (+) consists of pure aluminum foil with an etched surface, covered with a evenly very thin barrier layer of insulating aluminum oxide.It operates as a dielectric. The electrolyte, covering the rough surface of the oxide layer, operates as the second electrode, the cathode (-). E-caps have the largest capacitance values per unit volume compared to the two other main conventional capacitor families, ceramic and plastic film capacitors, but much smaller capacitance than similar sized supercapacitors.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GS-85C-Radial-Aluminum-Electrolytic-Capacitors.pdf

1, ESR Equivalent series resistance: Electrolytic capacitors are often used in circuits where current levels are relatively high. Also under some circumstances and current sourced from them needs to have a low source impedance, for example when the capacitor is being used in a power supply circuit as a reservoir capacitor. Under these conditions it is necessary to consult the manufacturers datasheets to discover whether the electrolytic capacitor chosen will meet the requirements for the circuit. If the ESR is high, then it will not be able to deliver the required amount of current in the circuit, without a voltage drop resulting from the ESR which will be seen as a source resistance.

2, Frequency response: One of the problems with electrolytic capacitors is that they have a limited frequency response. It is found that their ESR rises with frequency and this generally limits their use to frequencies below about 100 kHz. This is particularly true for large capacitors, and even the smaller electrolytic capacitors should not be relied upon at high frequencies. To gain exact details it is necessary to consult the manufacturers data for a given part.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GH-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

(1) Kt GKT-GS is super miniaturized and high reliability, Kt GKT-GT is high Temperature, Kt GKT-GL is long life, Kt GKT-GH is low impedance and high ripple current.

(2) Kingtronics Radial Aluminum Electrolytic Capacitors are Space and cost savings.

(3) RoHS compliantRoHS directive (2011/65/EU), which meet RoHS 2.0.

(4) Kt Radial Aluminum Electrolytic Capacitors Pb free reflow soldering compliant.

For more products information please check:
http://www.kingtronics.com/pdf/GKT-SS-85C-Snap-in-Aluminum-Electrolytic-Capacitors.pdf

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
Chip EXPO 2017
Chip EXPO 2017
"Expocentre" Moscow Russia
Date: Oct 31 - Nov 2nd, 2017
Booth No.: B 20

Meet Kingtronics in Munich soon
Electronica 2018
Electronica 2018
New Munich Trade Fair Centre, Germany
Date: 13-16 November, 2018
Booth No.: To be advised

Calendar

<< 2017-11 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30