Rectifiers find a use in detection of amplitude modulated radio signals. The signal may be amplified before detection, but if un-amplified, a very low voltage drop diode must be used. When using a rectifier for demodulation the capacitor and load resistance must be carefully matched. Too low a capacitance will result in the high frequency carrier passing to the output and too high will result in the capacitor just charging and staying charged.

Kingtronics’s fast recovery rectifier diodes are very popular in the overseas market, According to the rectifier’ s application , Our Kingtronics managing ordinary rectifier diodes, ultra-fast rectifier diodes. In our Kingtronics website www.kingtronics.com ,we have detailed PDF about all kinds of diodes & rectifiers.

The steady-state and dynamic reliability of a tantalum capacitor are influenced by several factors under the control of the circuit design engineer. These factors are voltage derating, ripple current and voltage conditions, maximum operating temperature and circuit impedance. Tantalum capacitors possess very low electrical leakage (high leakage resistance), and will retain a charge for a long duration. They are tolerant of hot operating environments up to 125 °C, unlike standard aluminum electrolytic capacitors. Tantalum capacitors are relatively expensive, particularly the military grades. They are not particularly tolerant of heavy charge and discharge currents, particularly those of a repetitive nature, and their effective series resistance (ESR) can be high when compared to ceramics or aluminum electrolytics.

Kingtronics produce tantalum capacitors since 1997, include dipped tantalum capacitors (through hole capacitors), general purpose chip tantalum capacitors (surface mount) and Low-ESR chip tantalum capacitors (surface mount).

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
electronicAsia-2019
electronicAsia-2019
Convention and Exhibition Centre,HongKong
Date: 13-16 October, 2019
Booth No.: 5G-C26

Meet Kingtronics in Munich soon
electronica-2020
Electronica-2020
New Munich Trade Fair Centre, Germany
Date: 10-13 November, 2020
Booth No.: To be advised

Archives

Calendar

<< 2019-9 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30