Kingtronics Blog

5G Technology trend is the most popular issue in 2020. Are you ready for 5G Technology come out to the 3C market? 

Radial Aluminum Electrolytic Capacitor is one of the most important components would be applied on 5G cell site. The Aluminum Electrolytic Capacitor demands of 3C market is getting more and more. 

However, We have strongest production line with outstanding qualities and reasonable price for decades in European market. 

Welcome to contact us for further details is you are interested in our Radial Aluminum Electrolytic Capacitor. 

If you want to order Kingtronics Radial Aluminum Electrolytic Capacitors, please pay attention to the following essential aspects---(Rated Voltage, Capacitance, Capacitance Tolerance, Dimension, Pitch/Pins, Lead Length, Packing ) 

Free samples are available. Looking forward to your enquiry and expected your order. If you need more products information, please check: http://www.kingtronics.com/aluminum-electrolytic-capacitors/

3, Leakage: Although electrolytic capacitors have much higher levels of capacitance for a given volume than most other capacitor technologies, they can also have a higher level of leakage. This is not a problem for most applications, such as when they are used in power supplies. However under some circumstances they are not suitable. For example they should not be used around the input circuitry of an operational amplifier. Here even a small amount of leakage can cause problems because of the high input impedance levels of the op-amp. It is also worth noting that the levels of leakage are considerably higher in the reverse direction.

4, Ripple current: When using electrolytic capacitors in high current applications such as the reservoir capacitor of a power supply, it is necessary to consider the ripple current it is likely to experience. Capacitors have a maximum ripple current they can supply. Above this they can become too hot which will reduce their life. In extreme cases it can cause the capacitor to fail. Accordingly it is necessary to calculate the expected ripple current and check that it is within the manufacturers maximum ratings.

5, Tolerance: Electrolytic capacitors have a very wide tolerance. Often capacitors may be quoted as -20% and +80%. This is not normally a problem in applications such as decoupling or power supply smoothing, etc. However they should not be used in circuits where the exact value is of importance.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GT-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

Kingtronics Aluminum electrolytic capacitors are used in virtually every segment of the electronics industry, such as VTRs, videos, cameras, car radios and micro cassette tape recorders, etc.The longer lead is positive electrode and the shorter one is negative electrode.

General purpose and can be used in Industrial. Aluminum electrolytic capacitors are widely used to provide temporary voltage hold-up (they act as short-term energy sources) during transition periods (high load, line droops, and transient events).

Aluminum electrolytic capacitors are widely used to provide temporary voltage hold-up (they act as short-term energy sources) during transition periods (high load, line droops, transient events) within most electrical circuits.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GL-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf