Kingtronics SMD ECAP can make replacement for following Brand with more excellent lead time and price!

Kindly share your inquiry with us to help you cost down, welcome contact us for more information.

Ecap website: http://www.ecap.hk/

Kingtronics Aluminum Electrolytic Capacitor Factory: https://www.youtube.com/watch?v=QEPG2WRuHsk

Cross ref.: http://www.ecap.hk/download/Kingtronics-SMD-Aluminum-Electrolytic-Capacitors-Cross-Reference.html

Aluminum Electrolytic Capacitors - SMD Type
Kingtronics P/N Characteristic Nichicon Samwha Rubycon CHEMI-CON
GKT-VA 85°C 2000Hr~3000Hr UWX SC SEV MVA
GKT-VT 105°C 1000H~2000H UWT RC SKV MVE
GKT-VE 105°C 2000H-3000H UA JM SJV MVL
GKT-VK 105°C 2000H-3000H UD CM   MLA
Extra Lower Impedance
GKT-VL 105°C 3000H-5000H UL CA SLV, SGV MLK, MVL
GKT-VZ 105°C 1000H-2000H WF CK TZV MZA, MVY
Low Impedance

Are you finding bridge rectifiers? Do you ever use Kingtronics bridge rectifiers? Let me take this chance to introduce Kingtronics to you.
 
Kingtronics, a hongkong based manufacturer since 1990. 
 
With mature technology, stable quality, competitive price, excellent service makes kingtronics very good reputation over the market! 
Bridge Rectifiers are available at Kingtronics under our own brand "kingtronics", all products are with kingtronics' registered trade mark "Kt", you can find our logo on the product body.

Kingtronics offer a wide of bridge rectifiers, with UL certification, please view our selection of bridge rectifiers below:

Bridge DB107MB10SKBL410KBPC2510KBPC3510GBU410GBJ810....etc...

Hi, dear, do you want to know what size bridge you need to use when replacing? Here I want to share with you my experience.

I get variations of this question quite often, such as: I don't see the bridge used in the Atari AC power "brick"....

My Tempest manual says I need a MDA3501 bridge & I can't find one....What's a suitable replacement for my T3501... and so on.

Like diodes & many other components, the key is usually in the part number. I have added more info on the Parts Page beside each one listed to better aid you.

But I will put a brief note here, as well. In both the examples cited above the bridge is ...from the part number.... a 35[amp]01[ 100 volt].

Generally speaking the first digit/s will refer to the amperage that the bridge is capable of handling & the ending digit/s the voltage it is capable of handling.

As Scotie would say...if you put a 2501 in place of the cited bridge, she's gonna blow!... since the bridge is only able to handle up to 25 amps of current even though the 100 volts is sufficient.

You could go to an "02" 200 volt, "04" 400 volt or higher & still end up with a blown bridge. You need to at least meet both amperage & voltage of the original when replacing.

A good replacement for the cited bridge would be a 3502... disregarding mrf's prefix or suffix.... for 35 amps & capable of handling 200 volts before popping a leg.

Much like sister components.... diodes, capacitors & resistors, you can safely go beyond specs, but not below.

1N4001 [1A50v] can be replaced by any in the series up to 1N4007 [1A1000V]
100uF 160V cap can be replaced by a 100uF 200V or better cap
220 ohm 1/4w resistor can be replaced by a 220 ohm 1/2w resistor

We Kingtronics are a professional bridge rectifier manufacturer. And we have got ISO9001:2008 Certification and UL certification.

If you have inquiry for our bridge rectifier, pls send email to info@kingtronics.com thanks!

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
Chip EXPO 2017
Chip EXPO 2017
"Expocentre" Moscow Russia
Date: Oct 31 - Nov 2nd, 2017
Booth No.: B 20

Meet Kingtronics in Munich soon
Electronica 2018
Electronica 2018
New Munich Trade Fair Centre, Germany
Date: 13-16 November, 2018
Booth No.: To be advised

Archives

Calendar

<< 2019-5 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31