Kingtronics Blog

Kingtronics:Tantalum capacitor Full satisfy TELTONIKA

TELTONIKA:  We will not even start searching for new manufacturers, because your quality and supply fully satisfy us.

Kingtronics produce and supply Tantalum Capacitors with top quality around the world for years.

Our Tantalum Capacitors product series can replace world famous brand with more competitive price!

Below are some of the cross reference for our Tantalum Capacitors.Welcome to contact us with your inquiry.

Kingtronics Tantalum Capacitors Cross Reference
	Standard Chip type	Low ESR Chip type	Radial Epoxy Dipped type
Cap. & Volt Range	0.1uF ~ 470µF; 4V - 50V		0.1uF~ 330µF; 6.3V - 50V
Kingtronics	CKT series	EKT series	TKT series
AVX(KYO CERA)	TAJ	TPS	TAP
Kemet	T491	T495	T350 to T390
KOA/Hitachi	TMC /TMC-M	TMC-R
Nichicon	F93		S89
Panasonic	TE(ECST		ECSF
Application	General purpose	Power supplies or the product require the highest level of robustness	Home appliances; camcorders; computers; telephones;
			instruments and meters etc.

Kingtronics Solid Polymer Tantalum Capacitors Chip type
PKT series
CAP. RANGE	0.47- 1000µF
VOLT. RANGE (DC)	2.5V - 63V
TEMP. RANGE	-55 ~ +105
Application	DC/DC converters; notebook PCs;
	Telecommunications; displays; SSD; HDD; USB etc.

Kingtronics launched a new tantalum series - Silver and Metal Axial Wet Tantalum Capacitors, with the features of:

Welcome contact us for more details and inquiry. 

Axial Wet Tantalum Capacitors
SERIES	DESCRIPTION	Encapsulation	CAP. RANGE	VOLT. RANGE (DC)	TEMP. RANGE (°C)
ZKT-30	Silver Axial Wet Tantalum Capacitors	Epoxy end-filled	0.5 - 3300 µF	6.3V - 125V	-55 ~ +125
ZKT-35	Silver Axial Wet Tantalum Capacitors	Epoxy end-filled	1 - 1500 µF	6.3V - 125V	-55 ~ +125
ZKT-01	Metal Axial Wet Tantalum Capacitors	Hermitically Sealed	0.1 - 1000µF	6.3V - 100V	-55 ~ +125

(1)It is recommended that capacitors should be used at a voltage less than the rated voltage.
It is also recommended to properly derate the voltage to improve operating reliability. 

(2)Customers in the product installation to avoid the occurrence of individual products locally over temperature conditions (≥260 ℃), and to avoid direct contact with high temperature soldering paste tantalum capacitor body.

(3) In low impedance circuit applications such as power supply circuits, the failure rate may increase due to inrush current.
Additionally, if a short occurs within the capacitor, burning may possibly occur.
Therefore, sufficient voltage derating is recommended. Use voltage should be within 30% -50% of the rated voltage, thereby improving the reliability of the circuit, in order to avoid the adverse effects of inrush current.

For more products information please check:
http://www.kingtronics.com/mlcc-capacitors/chip-tantalum-capacitors.html