Kingtronics Blog

Did you hear that  tantalum capacitor will be insufficient because of market stockout?

It means the price will increase, and lead time will also be much longer. Do you plan to keep some inventory before changes?

Pls send us your inquiry list. Let's help you with stock supplement. Any question, pls send email to capacitor@kingtronics.cn

Kingtronics brand, ISO manufacturer since 1990 with 2 factories

Historically, Tantalum capacitors have been used for smoothing and decoupling applications for switching power supplies, DC/DC converters, LCD drivers and general digital circuits. As the need grew for efficient power converters that operate at high frequencies, the design engineer needed components that dissipated less heat. For high frequency applications‚ chip capacitor is an excellent substitute for a Tantalum capacitor. Compared to a Tantalum capacitor‚ chip capacitor has a low ESR and low ESL at high frequencies. As a result, selecting a Tanceram‚ capacitor with 1/2 to 1/10th the capacitance of a Tantalum will produce an impedance that is more than an order of magnitude lower than the Tantalum capacitor over the same high frequency range. The following example will compare the performance.

From 100 KHz to 70 MHz the typical 4.7µF, chip capacitor has a measured ESR from .05 to .02 Ohms while a typical 10µF Tantalum capacitor ESR measures from 1.2 to 0.8 Ohms. In this example‚ chip capacitor has a typical ESR that is 4% of the value of a comparable Tantalum capacitor over the frequency range of 100 KHz to 70 MHz. (See Figure 1.)

A typical 4.7uF Tanceram‚ chip capacitor has low impedance from 100 KHz to 70 MHz. From Figure 2 the self-resonant frequency is approximately 3 MHz, for a remarkably low ESL of 600pH! Also, the lower impedance produces less heat in power conversion applications. Figure 3 shows the temperature rise vs. ripple current. From the example capacitor values‚ chip capacitor can handle approximately 3 times the ripple current to produce a comparable temperature rise.

Often, substituting a Tanceram‚ chip capacitor to replace a Tantalum capacitor will reduce the circuit size and cost while providing superior performance.