Kingtronics join in a charitable donation over 20 years, and some beneficiary always write to us, We are also happy to receive feedback whatever about study or life. Please keep in touch!

We are doing our best and using our voice to create as much positive change, hope the society will take more care of vulnerable Groups.

We know we have a good heart and we feel like to making the help for some adolescent who is left-behind children. If you have the empathy to empathize with a good heart, probably you can share the same kind of morals I do.

In the use of chip MLCC, many customers will encounter capacitor cracking, short circuit, burning and other phenomena, so how to deal with these phenomena?
First of all, we need to know the causes of these phenomena.

A. Crack (refers to the crack on the capacitor that causes the product to fail to work normally). This phenomenon is generally caused by low resistance.
The reasons are as follows.

1. PCB is mostly open circuit after external force.
2. If the non-capacitor body is impacted by external force, it may have short circuit or low resistance.
3. Too high applied stress voltage will lead to MLCC capacitor failure, generally short circuit or low resistance, but this kind of phenomenon should not be much in the case of sufficient allowance.

In this case, it is generally necessary to check whether the product will be vibrated or shaken when working, and then check whether the product capacity meets the requirements.
B. Short circuit burn out (refers to the damage of the capacitor in the PCB board, resulting in the failure of the product to continue to work).

The reasons for this phenomenon are as follows.
1. The model of capacitor package is not big enough;
2. Insufficient reserved allowance;
3. The voltage withstand is too low or the product current is too high.

If this happens, we need to replace the chip capacitor model and check the specific reason. Then choose to replace the chip capacitor capacity or model.
If you can't find a suitable model to replace, you can use the capacitors in parallel or series to solve the problem.

Kingtronics can support you with qualified chip MLCC.
Welcome to share us your demand !

Surface Mount MLCC Capacitors(Multilayer Ceramic Capacitors)

SERIES

KINGTRONICS DESCRIPTION

CAP. RANGE

VOLT. RANGE (DC)

TEMP. RANGE (°C)

LKT

Chip MLCC Capacitors(Multilayer Ceramic Capacitors)

0.1pF ~ 10uF

4VDC to 50VDC

NPO, X7R, Y5V,

HKT

High Voltage Chip MLCC Capacitors

0.5pF - 1µF

63VDC to 4000VDC

NPO, X7R

BKT

High Q Low ESR RF Multilayer Ceramic Capacitors

0.1pF - 6800pF

250VDC to 7200VDC

COG

Kt Kingtronics Introduces Causes of Poor Chip MLCC

The price of raw materials rises and the cost of passive components rises.
Passive components are mainly divided into three families: resistors, capacitors, and inductors, many of which are made of copper and aluminum.
The price of copper clad laminate (CCL) has risen recently, and the source is the rise in copper prices. The situation in the aluminum market is the same as that in the copper market. They both started to rise at the end of the first quarter and have accumulated a lot of gains.
With the recovery of market demand, the prices of copper and aluminum can be adequately supported. For passive component manufacturers, the price increase of copper and aluminum will increase the cost of raw materials, and price increases to ensure profits may occur frequently.

Several major markets have recovered and demand for passive components has increased.
With the development of the 5G industry chain, electric vehicles and other fields, the PC and server market demand caused by the "home economy" caused by the epidemic remains unchanged. In general, several important markets around the world are recovering in the fourth quarter, which will also stimulate the growth of passive component market demand.
In many industry sectors, the 5G industry chain and new energy vehicles have the largest increase in demand for passive components, and they are also key projects that are supported.

In the future, under the background of strong new energy vehicles, the demand for passive components will also increase sharply. In the 5G industry, both mobile phone business and new base stations are inseparable from the demand for passive components, and they are more than ever.

Major factories suspend production, may be the final push for price increases.
At a time when the supply and demand relationship in the passive component market is tight, the original factory has stopped production again, which may directly break the market balance and become the ultimate driver of price increases.

According to the latest report from Taiwanese media, Taiwan's passive component factory Walsin Malaysia factory has an employee infected with the epidemic. Currently, production is temporarily suspended and is planned to be suspended for three weeks. Affected products may include car gauge resistors, 0201 resistors and high-energy resistors.
The current critical period for demand recovery is that the original passive component factory is too late to expand production. This time, instead, a new gap has been created due to the suspension of production by Walsin. Next, it depends on how many transfer orders from Walsin can be absorbed by Yageo and Chilisin, and whether they will take advantage of the situation to raise prices.

According to the latest situation, the price increase of passive components will come earlier than expected, and the possibility that the market will start at the end of the year will greatly increase. All of us should take countermeasures from now on to prevent sudden changes in the market from being caught off guard.
Welcome to check Kingtronics latest offer support for below strong passive components!

RKT-Trimming Potentiometer RKT-3006, RKT-3266, RKT-3269, RKT-3296, RKT-3323, RKT-3329, RKT-3362, RKT-3386, RKT-3306, RKT-3309, RKT-3540S, RKT-3590, RKT-C3305, RKT-065
GKT-Aluminum Electrolytic Capacitor Axial Type, Radial Type, Snap-in Type, Screw Type and Lug Type and SMD Chip Type
MKT-Radial Multilayer Ceramic Capacitor
KKT-3mm Chip Ceramic Trimmer Capacitor 3pF, 6pF,10pF, 20pF, 30pF

Recently we have received more and more orders for Aluminum Electrolytic Capacitors, do you also have demands?
Kingtronics posses with the strongest production line of Aluminum Electrolytic Capacitors for decades, the reliable qualities, efficient lead time and competitive price are always the essential standard we insist to maintain.
Refer to the Axial Type of the general information, it is one of our popular products we produce

Following is the general information of Aluminum Electrolytic Capacitors Axial Type, welcome to contact us for the details.
Application include:
1.Automotive electronics: air conditioning system, head-up display, AV system, car battery management system, digital driving recorder
2.General purpose and industrial, automotive, telecommunication, audio-video
3.Coupling, decoupling, timing, smoothing, filtering, buffering in SMPS
4.Boards with restricted mounting height, vibration, and shock resistant

Aluminum Electrolytic Capacitors Axial Type

Kingtronics P/N

Load Life

Temperatures

Characteristic

GKT-AL

2000H

85°C

Low Leakage Current

GKT-AV

2000H

85°C

Standard

GKT-AT

1000H

105°C

Standard

GKT-AA

1000H

105°C

Audio, DF at Max 4% BP

GKT-AM

1000H

105°C

Audio, DF at Max 5% BP

GKT-AN

1000H

105°C

Audio, DF at Max 10% BP

GKT-AQ

1000H

105°C

Audio, DF at Max 10% BP


Kingtonics The Best Support of Axial Aluminum Electrolytic Capacitors

Super capacitors, also known as electrochemical capacitors (electric double layer capacitors), gold capacitors, farad capacitors.
It is a kind of electrochemistry and component developed from the 70s and 80s of last century to store energy through polarized electrolytes.
It is a power supply with special performance between traditional capacitors and batteries.

Features are:
*Higher capacitance than electrolytic capacitors, Higher power than secondary batteries
*Safety
*Non-chemical based 
*charging-discharge mechanism proviedes safety from hazard factors comparing secondary batteries
*Environment Friendly
*Million times of charge-discharge cycle Semi permanent life cycle

Application:
Smart phones, PDAs, digital cameras,
SSD, hand tools, home electronics
GPS modem

Kingtronics DKT series can help you to with the need of Super Capacitor, welcome to check our best offer anytime.

Super Capacitors Radial, Snap-in, Screw and Coin type

Kingtronics P/N

Rated Voltage

Temperatures

Characteristic

DKT-DA

5.5V

-25~+70°C

Coin type, large capacity

DKT-DZ

2.7-3V

-40~+70°C

Radial/Snap-in/Screw type, low ESR

Kingtronics-Brief Knowledge of Super Capacitor

Health is the most important, stay well.

The study on the impact of COVID-19 on the global manufacturing industry is classified into automobile, food & beverage, chemical, machinery, electrical and electronics, metal, aviation, pharmaceutical and medical equipment, and others. The electronics industry is being significantly affected due to the COVID-19 epidemic, China accounts for nearly 85% of the total value of components utilized in smartphones and nearly 75% in the case of televisions. All critical components, such as printed circuit boards, mobile displays, LED chips, memory, open cell TV panels, and capacitors are imported from China.

Now China manufacturing industry gets recovery from COVID-19, we all dedicate ourselves to provide the most economical solutions on support global requirements.

Herein we list our strongest lines to ensure customers get the most of profit and save the most of cost.

1>GKT- Aluminum Electrolytic Capacitor (SMD E Cap, Snap in, Screw)
Introduction: http://kingtronics.com/aluminum-electrolytic-capacitors/
Cross reference: http://www.ecap.hk/Kingtronics-Aluminum-Electrolytic-Capacitors-Cross-Reference.html

2>MKT-Radial MLCC Capacitors(Multilayer Ceramic Capacitors)
Introduction: http://kingtronics.com/mlcc-capacitors/radial-mlcc-capacitors.html
Cross reference: http://kingtronics.com/pdf/Kingtronics-Tantalum-and-Ceramic-Capacitors-Cross-Reference.pdf

3>KKT-SMD 3mm Trimmer Capacitor 3pF, 6pF,10pF, 20pF, 30pF/Variable Capacitor
Introduction: http://kingtronics.com/Ceramic-Trimmer-Capacitors/KKT-SMD-3mm-Ceramic-Trimmer-Capacitor.html
Cross reference: https://www.kingtronics.tw/archives/Kt-Kingtronics-3MM-Ceramic-Trimmer-Capacitors-Replace-Murata-TZC3-Series-20190225.html
                           https://www.kingtronics.tw/archives/Kt-Kingtronics-3MM-Ceramic-Trimmer-Capacitors-Replace-Murata-TZB4-Series-20190227.html

4>RKT- Trimming Potentiometer/Trimmers/Trimpots
Introduction: http://kingtronics.com/trimming-potentiometers/index.html
RKT-3006, RKT-3266, RKT-3269, RKT-3296, RKT-3323, RKT-3329, RKT-3362, RKT-3386, RKT-3306, RKT-3309, RKT-3540S, RKT-3590, RKT-C3305, RKT-065
Cross reference: http://kingtronics.com/pdf/cross-reference.pdf 

 Kt Kingtronics Strongest lines: Capacitors-GKT,MKT,KKT; Trimpots-RKT

Are you looking for Cost Down? Project Development? Second Source? Good Quality Manufacturer? Come enjoy one-stop service from Kingtronics.
Kingtronics is nominated as top manufacturers with MuRata, Vishay, and Yageo according to the Aluminium Capacitors market report.

Lead time of following Snap-in type ECAP is around 3~4 weeks. For other capacity not listed below also welcome your inquiry.

Application such as AC / Motor, Power, lighting, medical equipment, air conditioner, high voltage, automobile, charger, adapter, ballast, etc.

Let us give you best support.

Aluminum Electrolytic Capacitors - Snap-in, Lug and Screw Type

Kingtronics P/N

Load Life

Temperatures

Characteristic

GKT-SS

2000H

85°C

Snap-in, High Ripple Current

GKT-ST

2000H

105°C

Snap-in, High Ripple Current

GKT-SC

5000H

85°C

Snap-in, High Ripple Current

GKT-SD

3000H

105°C

Snap-in, High Ripple Current

GKT-CA

2000H

85°C

Screw, High Ripple Current

GKT-CB

2000H

105°C

Screw, High Ripple Current

GKT-UA

1000H

85°C

Lug, Standard product

  Kt Kingtronics Aluminum Electrolytic Capacitors Snap-in type

Mid-Autumn Festival is an East Asian harvest festival, held on the 15th day of the 8th month of the lunar calendar with full moon at night.

 
Several official names are used as Mid-Autumn Festival, Tsukimi 月見 in Japan, Chuseok 추석 in Korea, Tết Trung Thu in Vietnam.
 
The festival celebrates three fundamental concepts that are closely connected--Gathering, Thanksgiving, Praying.
 
Kingtronics wishes you have a great reunion with family and friends as well as sincerely wish we could help u do more business. 
 
Now we provide good offer for EKT Low ESR Chip Tantalum Capacitors, let us know how we could help u cost down.
 

SERIES

DESCRIPTION

CAP. RANGE

VOLT. RANGE (DC)

TEMP. RANGE (°C)

EKT

Low ESR Chip Tantalum Capacitors

0.1 - 470µF

4V - 50V

-55 ~ +125

Datasheet: http://www.kingtronics.com/pdf/low-esr-chip-tantalum-capacitors.pdf

Thanks to our UK distributor Electron Electronics' trust and efforts, we were advertised on page 75 of Electronics Sourcing's annual edition in 2016 (UK & Ireland).

This is a very popular magazine published globally in UK & Ireland, North America, Europe, Germany etc.

It's our great honor to cooperate with so reliable partner. Let's grow together and make new achievement this year! Thank you very much.

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar

<< 2024-3 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31