A.Power supply circuits

Stable DC power supplies are divided into intermittent control types (switching regulator) and continuous control types (Dropper).
Recent trends have shown an overwhelming growth in switching regulators, and so we talk mainly about switching regulators below.
The capacitors used in switching regulators are selected depending on the circuit. A forward switching regulator is shown as an example in Flg.6-1. Another type is a fly back regulator.



(1) Aluminum electrolytic capacitors for input (primary) smoothing circuits The Aluminum electrolytic capacitors for input smoothing circuits used on commercial voltages (100 V.AC, 200 V.AC) and commercial frequencies (60 Hz, 50 Hz) must have a high withstand voltage and a ripple current resistance complying with twice the commercial frequency (normally full-wave current).
These capacitors have large volumes (ground contact areas) compared to other components they are assembled with ,and so the demand for more compact capacitors, as well as power supplies, is strong. Another problem is the need for longer aluminum electrolytic capacitor lives, but products guaranteed for 5000 hours at 105 have recently been developed, thus realizing freedom from maintenance for 10 years.

(2) Aluminum electrolytic capacitors for output smoothing circuits The rated voltage of aluminum electrolytic capacitors used for smoothing at switching frequencies (20 k to 500 kHz) is determined by the output voltage, and they must have low impedance (low ESR) at switching frequencies. Therefore aluminum electrolytic capacitors for output smoothing are designed to have low impedance at 20 k to 500 kHz, and the recent development of a low resistance electrolyte using new materials has resulted in products with 1/3 to 1/4 the impedance of conventional products with the same volume. These low impedance products also have an extremely stable life

B. ECU for automotive

The electronization of in-vehicle control is accelerating these days. ECU (electrical control unit) which carries out in-vehicle control is asked for high reliance, a miniaturization, and high quality, and many aluminum electrolytic capacitors are used for it. A typical application example is shown below. 

(1) Power train ECU (Engine、 HV-Inverter etc.)



(2) Motor control ECU(Power steering, a blower / radiator fan motor, an electric pump etc.)


(3) LED lump


(4) Airbag


In automotive application, there are mainly an object for smoothing of input and output of the power supply of ECU and an object for energy reserve.
The rated voltage of 25 to 50 V.DC is mainly used.Not only current aluminum capacitor, aluminum capacitor with conductive polymer and
electrolyte is increasing due to improve quality, performance, with standing-voltage.It contributes to the small size of ECU, and a weight saving these days.

Kingtronics Aluminum Electrolytic Capacitor is designed with  long life, low Impedance, wide Temperatures range and excellent performance. our SMD type Aluminum Electrolytic Capacitors are available in the range of <1 μF to several farads with working voltages up to several hundred volts DC. A thin layer of aluminum oxide forms the dielectric.

Following are our E-cap catalog and SMD type cross reference, welcome contact us for more information. application:
power supplies,
Industrial Welding Machines,
Variable Frequency Speed Controller
Power Socket
Lamp,  Lighting
LED Power Device, LED Driver,
Power Meters, Energy Meters, and other general purpose.

Kt Kingtronics - Aluminum Elec. Capacitors Catalog : https://www.kingtronics.com/pdf/Kingtronics-Aluminum-Electrolytic-Capacitor-Leaflet.pdf
Kingtronics SMD Type Aluminum Electrolytic Capacitors Factory: https://www.youtube.com/watch?v=ZpMf5VRjjFU&t=3s

Aluminum Electrolytic Capacitors - SMD Type

Kingtronics P/N

Characteristic

Nichicon

Samwha

Rubycon

CHEMI-CON

GKT-VA

85°C 2000Hr~3000Hr

UWX

SC

SEV

MVA

GKT-VT

105°C 1000H~2000H

UWT

RC

SKV

MVE

GKT-VE

105°C 2000H-3000H

UA

JM

SJV

MVL

GKT-VL

105°C 3000H-5000H

UL

CA

SLV, SGV

MLK, MVL

GKT-VZ

105°C 1000H-2000H
Low Impedance

WF

CK

TZV

MZA, MVY

MuRata will stop offer trimmer capacitors after 2021 March, maybe it is not a good new for some customer who support product by MuRata. Some product of TZY2 series, which is small and thin size with external dimensions of 2.5(W) x3.2 (L) x1.25max(H)mm, have been discontinued (remark:red). Blue-label products will be discontinued as below.

If you change your PCB pattern size, Kingtronics KKT series suit for you, which is small size with external dimension of 3.2(W) x 4.5(L) x 1.5(T) mm. New shape of cover can improve the adhesion between rotor and stator leads to superior stability. It is suitable for high frequency circuit due to high self-resonant frequency. We can be your best support for KKT series with regular stock, competitive price, RoHS qualification, few samples!

It designed for reflow soldering and application for crystal oscillators, crystal filters, radar detectors, stylus pen, compact radios, hand radios, burglarproof devices, headphone stereos, and remote keyless entry systems

Capacitance          (pF MAX) Murata Kingtronics
Part Number L x W (size) Part Number L x W (size)
45pF TZY2K450AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
45pF TZY2K450AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
20pF TZY2R200AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-320TR (Pink) 3.2(W) x 4.5(L) x 1.5(T)mm
20pF TZY2R200AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-320TR (Pink) 3.2(W) x 4.5(L) x 1.5(T)mm
25pF TZY2R250AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-330TR (Green) 3.2(W) x 4.5(L) x 1.5(T)mm
25pF TZY2R250AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-330TR (Green) 3.2(W) x 4.5(L) x 1.5(T)mm
1pF TZY2Z010AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
1pF TZY2Z010AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
3pF TZY2Z030AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
3pF TZY2Z030AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
6pF TZY2Z060AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-306TR (Blue) 3.2(W) x 4.5(L) x 1.5(T)mm
6pF TZY2Z060AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-306TR (Blue) 3.2(W) x 4.5(L) x 1.5(T)mm
10pF TZY2Z100AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-310TR (Ivory) 3.2(W) x 4.5(L) x 1.5(T)mm
10pF TZY2Z100AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-310TR (Ivory) 3.2(W) x 4.5(L) x 1.5(T)mm
2.5pF TZY2Z2R5AC01B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
2.5pF TZY2Z2R5AC01R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
45pF TZY2K450A001B00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
45pF TZY2K450A001R00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
20pF TZY2R200A001B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-320TR (Pink) 3.2(W) x 4.5(L) x 1.5(T)mm
20pF TZY2R200A001R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-320TR (Pink) 3.2(W) x 4.5(L) x 1.5(T)mm
25pF TZY2R250A001B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-330TR (Green) 3.2(W) x 4.5(L) x 1.5(T)mm
25pF TZY2R250A001R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-330TR (Green) 3.2(W) x 4.5(L) x 1.5(T)mm
1pF TZY2Z010A001B00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
1pF TZY2Z010A001R00 2.5(W)x3.2(L)x1.25max.(H)mm N/A N/A
3pF TZY2Z030A001B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
3pF TZY2Z030A001R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
6pF TZY2Z060A001B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-306TR (Blue) 3.2(W) x 4.5(L) x 1.5(T)mm
6pF TZY2Z060A001R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-306TR (Blue) 3.2(W) x 4.5(L) x 1.5(T)mm
10pF TZY2Z100A001B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-310TR (Ivory) 3.2(W) x 4.5(L) x 1.5(T)mm
10pF TZY2Z100A001R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-310TR (Ivory) 3.2(W) x 4.5(L) x 1.5(T)mm
2.5pF TZY2Z2R5A001B00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm
2.5pF TZY2Z2R5A001R00 2.5(W)x3.2(L)x1.25max.(H)mm KKT-303TR (Black) 3.2(W) x 4.5(L) x 1.5(T)mm

Note:1.The product information in this catalog is for reference only,Please contact our sales before ordering: info@kingtronics.com
          2.Blue: To be discontinued      / Red: Discontinued

Hertz (Hz)
The basic unit of measurement of frequency. It is a measurement used to denote one complete occurrence of an event in one second.
The frequency of a crystal is measured in megahertz (MHz) or kilohertz (kHz). In Kingtronics we usually usd KHz.

Frequency 
Measured in Hertz (Hz), it is a periodic repetition of an event within a unit of time. 
In an electrical circuit, it is the number of times a resonator plate oscillates or vibrates in one second. The most common herts for Kingtroncis QKT is 32.768KHz

Frequency Tolerance
Often called Calibration Accuracy, it is the amount of frequency deviation from the specified nominal frequency at room temperature (25°C). 

This term is expressed as a minimum and maximum percent (%) or parts per million (ppm). Kingtronics can provide -20~+70, -40~+85, -10~+60

Load Capacitance
A capacitance, specified in picofarads (pF), presented to the crystal. 

The parallel load resonant frequency (FL) is a function of the load capacitance.

For more details, please refer to below link, thank you.
www.kingtronics.com/quartz-crystals/
www.abracon.com/Support/qtzcry_glossary.pdf
www.abracon.com/Support/qtzcryoscil_glossary.pdf

When you order Crystal Oscillator, you have to at least keep 5 essential aspects.
Package Type,  Frequency, Suply Voltage, Frequency Tolerance,Operating Temperature

Examples : 
QKT-OSC3225, 32.768KHz,  1.8V, +/-10ppm, -10~+60
QKT-OSC5032, 32.768KHz,  3.3V, +/-20ppm, -20~+70
QKT-OSC7050, 32.768KHz,  5.0V, +/-20ppm, -40~+85

Free samples are available and welcome your enquiry and test our samples.

If you need more products information, please check :
www.kingtronics.com/quartz-crystals/QKT-HC49SMD.html

When you order Quartz Crystal Resonator, you have to at least keep 5 essential aspects.
Package Type,  Frequency, Load Capacitance, Frequency Tolerance,Operating Temperature

Examples : 
QKT-HC49U, 16.000MHz,  20pF, +/-30ppm, -20~+70
QKT-HC49S, 12.000MHz,  20pF, +/-20ppm, -10~+60
QKT-HC49SMD, 10.000MHz, 20pF, +/-30ppm, -20~+70
QKT-3225SMD, 26.000MHz, 20pF, +/-10ppm, -20~+70

Free samples are available and welcome your enquiry and test our samples.

If you need more products information, please check : 
www.kingtronics.com/quartz-crystals/QKT-HC49S.html

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar

<< 2022-8 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31