5G Technology trend is the most popular issue in 2020. Are you ready for 5G Technology come out to the 3C market? 

Radial Aluminum Electrolytic Capacitor is one of the most important components would be applied on 5G cell site. The Aluminum Electrolytic Capacitor demands of 3C market is getting more and more. 

However, We have strongest production line with outstanding qualities and reasonable price for decades in European market. 

Welcome to contact us for further details is you are interested in our Radial Aluminum Electrolytic Capacitor. 

Kingtronics P/N

Load Life

Temperatures

Characteristic

GKT-GS

2000H

85°C

Super Miniaturized

GKT-GT

2000H

105°C

High Temperature

GKT-GH

2000H

105°C

Low Impedance

GKT-GL

5000H

105°C

Long Life

GKT-GD

3000H~6000H

105°C

Miniaturized, long life

GKT-GE

5000H

130°C

Long life

GKT-GF

5000H

105°C

Miniaturized,high stability

GKT-GQ

4000H~10000H

105°C

Long life, Miniature

GKT-GR

3000H~6000H

105°C

Long life,High frequency

GKT-GU

3000H

105°C

Lowest impedance

GKT-GZ

6000H-10000H

105°C

Extremely long life

GKT-GN

1000H

105°C

Non-Polarized

GKT-GW

2000H

105°C

Extra Lower Impedance

If you want to order Kingtronics Radial Aluminum Electrolytic Capacitors, please pay attention to the following essential aspects---(Rated Voltage, Capacitance, Capacitance Tolerance, Dimension, Pitch/Pins, Lead Length, Packing ) 

GKT

GS

0J

0R1

M

|

|

|

|

|

Series

Sub Series

Rated Voltage

Capacitance

Capacitance Tolerance

6.3V

0.1

±20%

500110

20

0

B

R

|

|

|

|

|

Dimension

Pitch/Pins

Lead Length

Packing

Pb

5x11

2.0

Standard

Bulk

RoHS

Free samples are available. Looking forward to your enquiry and expected your order. If you need more products information, please check: http://www.kingtronics.com/aluminum-electrolytic-capacitors/

3, Leakage: Although electrolytic capacitors have much higher levels of capacitance for a given volume than most other capacitor technologies, they can also have a higher level of leakage. This is not a problem for most applications, such as when they are used in power supplies. However under some circumstances they are not suitable. For example they should not be used around the input circuitry of an operational amplifier. Here even a small amount of leakage can cause problems because of the high input impedance levels of the op-amp. It is also worth noting that the levels of leakage are considerably higher in the reverse direction.

4, Ripple current: When using electrolytic capacitors in high current applications such as the reservoir capacitor of a power supply, it is necessary to consider the ripple current it is likely to experience. Capacitors have a maximum ripple current they can supply. Above this they can become too hot which will reduce their life. In extreme cases it can cause the capacitor to fail. Accordingly it is necessary to calculate the expected ripple current and check that it is within the manufacturers maximum ratings.

5, Tolerance: Electrolytic capacitors have a very wide tolerance. Often capacitors may be quoted as -20% and +80%. This is not normally a problem in applications such as decoupling or power supply smoothing, etc. However they should not be used in circuits where the exact value is of importance.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GT-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

Kingtronics Aluminum electrolytic capacitors are used in virtually every segment of the electronics industry, such as VTRs, videos, cameras, car radios and micro cassette tape recorders, etc.The longer lead is positive electrode and the shorter one is negative electrode.

General purpose and can be used in Industrial. Aluminum electrolytic capacitors are widely used to provide temporary voltage hold-up (they act as short-term energy sources) during transition periods (high load, line droops, and transient events).

Aluminum electrolytic capacitors are widely used to provide temporary voltage hold-up (they act as short-term energy sources) during transition periods (high load, line droops, transient events) within most electrical circuits.

For more products information please check: http://www.kingtronics.com/pdf/GKT-GL-105C-Radial-Aluminum-Electrolytic-Capacitors.pdf

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Meet Kingtronics in Moscow soon
electronicAsia-2019
electronicAsia-2019
Convention and Exhibition Centre,HongKong
Date: 13-16 October, 2019
Booth No.: 5G-C26

Meet Kingtronics in Munich soon
electronica-2020
Electronica-2020
New Munich Trade Fair Centre, Germany
Date: 10-13 November, 2020
Booth No.: To be advised

Archives

Calendar

<< 2020-9 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30