A Super Capacitors is a device which can store electrical energy quickly and discharge slowly.
Our Radial type Super Capacitors DKT-DX has high energy and power.

Application is as following, welcome contact us for more information.
*Smart Meter :smart electricity meter, smart water meter, smart gas meter
*Car Electronics: car audio, ETC systems, driving recorder.
*IoT 5G: smart TV, smart refrigerator, smart electronic door

We have to look at several factors that created this shortage tsunami that blindsided everyone. We have broken them down into the following: supply, demand, unfortunate events, and poor decision-making.

Surge in Demand
When Covid-19 restrictions rolled out worldwide, stay-at-home mandates were the norm to prevent the transmission and spread of the virus. Everyone shifted to work from home setups, businesses went online, and messaging applications were downloaded immediately. Consequently, demand for additional electronic gadgets skyrocketed. People upgraded their laptops, purchased new desktops, more tablets, etc., to meet the requirements of the current situation.

This bottlenecked supply chains, as retailers did not prepare for the sudden increase in demand for new requirements. Add the existing projects in their pipelines, and you have the perfect recipe for a global semiconductor disaster.

Bad Luck
Aside from facing COVID-related challenges, some of the biggest foundries in the world were hit by a series of unfortunate events that disrupted their production process even more.

On March 19, an electric overload burned down 600 square meters of the Renesas plant in Naka, one of the most prominent players in the global chip market. It destroyed 23 machines and rendered other areas in the facility temporarily unfit for use.

The plant was running to total capacity again by June, but the damage has been done.

In Taiwan, the worst drought in recent memory threatened to make the chip shortage even worse. Producing chips require tremendous amounts of water, which the drought is making impossible to do. In Texas, winter storms forced some of the country’s only chip plants to stop production.

Still, there are only a handful of big chip manufacturers globally, making the semiconductor industry more vulnerable.

Kingtronics NKT series NTC (Negative Temperature Coefficient) are thermally sensitive, semiconductor resistive devices that decrease in resistance as absolute temperature increases.
Resistance values range from 1.0Ω to 500KΩ.

These NTC thermistors are suited to a large scope of resistance values and temperature coefficients.
Common applications for the NTC Thermistors include temperature compensation, temperature measurement, fan motor control, and temperature sensors.

We offer first-hand support to give to the best pricing. For more information please contact our sales team.

Kingtronics NTC Thermistor helps you solve your inrush current or temperature sensing challenges

The price of raw materials rises and the cost of passive components rises.
Passive components are mainly divided into three families: resistors, capacitors, and inductors, many of which are made of copper and aluminum.
The price of copper clad laminate (CCL) has risen recently, and the source is the rise in copper prices. The situation in the aluminum market is the same as that in the copper market. They both started to rise at the end of the first quarter and have accumulated a lot of gains.
With the recovery of market demand, the prices of copper and aluminum can be adequately supported. For passive component manufacturers, the price increase of copper and aluminum will increase the cost of raw materials, and price increases to ensure profits may occur frequently.

Several major markets have recovered and demand for passive components has increased.
With the development of the 5G industry chain, electric vehicles and other fields, the PC and server market demand caused by the "home economy" caused by the epidemic remains unchanged. In general, several important markets around the world are recovering in the fourth quarter, which will also stimulate the growth of passive component market demand.
In many industry sectors, the 5G industry chain and new energy vehicles have the largest increase in demand for passive components, and they are also key projects that are supported.

In the future, under the background of strong new energy vehicles, the demand for passive components will also increase sharply. In the 5G industry, both mobile phone business and new base stations are inseparable from the demand for passive components, and they are more than ever.

Major factories suspend production, may be the final push for price increases.
At a time when the supply and demand relationship in the passive component market is tight, the original factory has stopped production again, which may directly break the market balance and become the ultimate driver of price increases.

According to the latest report from Taiwanese media, Taiwan's passive component factory Walsin Malaysia factory has an employee infected with the epidemic. Currently, production is temporarily suspended and is planned to be suspended for three weeks. Affected products may include car gauge resistors, 0201 resistors and high-energy resistors.
The current critical period for demand recovery is that the original passive component factory is too late to expand production. This time, instead, a new gap has been created due to the suspension of production by Walsin. Next, it depends on how many transfer orders from Walsin can be absorbed by Yageo and Chilisin, and whether they will take advantage of the situation to raise prices.

According to the latest situation, the price increase of passive components will come earlier than expected, and the possibility that the market will start at the end of the year will greatly increase. All of us should take countermeasures from now on to prevent sudden changes in the market from being caught off guard.
Welcome to check Kingtronics latest offer support for below strong passive components!

RKT-Trimming Potentiometer RKT-3006, RKT-3266, RKT-3269, RKT-3296, RKT-3323, RKT-3329, RKT-3362, RKT-3386, RKT-3306, RKT-3309, RKT-3540S, RKT-3590, RKT-C3305, RKT-065
GKT-Aluminum Electrolytic Capacitor Axial Type, Radial Type, Snap-in Type, Screw Type and Lug Type and SMD Chip Type
MKT-Radial Multilayer Ceramic Capacitor
KKT-3mm Chip Ceramic Trimmer Capacitor 3pF, 6pF,10pF, 20pF, 30pF

Ultra Low ESR Conductive Polymer Solid Tantalum Capacitors, PKT series, hold the high reliability and longer life spans of service. They make solid tantalum capacitors an appropriate choice for current surface mount technology (SMT) capacitors.

There are some famous Tantalum Capacitors brands, PKT series can completely replace. Hope check below table and help for you.Ultra Low ESR Conductive Polymer Solid Tantalum Capacitors, PKT series, hold the high reliability and longer life spans of service. They make solid tantalum capacitors an appropriate choice for current surface mount technology (SMT) capacitors.

There are some famous Tantalum Capacitors brands, PKT series can completely replace. Hope check below table and help for you.

AVX

KEMET

VISHAY

China

Kingtronics

TCJ

 T520

T55

CA55

PKT


Thankfulness & Blessings to all our valued customers in Warm holiday season

Christmas is coming, wish you have a warm & joyful time with all your love ones.

Pls note Kingtronics will be closed on 25th-26th Dec., and 1st Jan., 2020.

Many thanks for all our valued customers support toward us in 2019.

We look forward to the prosperous year 2020, and wish your company the success that it deserves.

Merry Christmas & Happy New Year !

Multiturn Adjustment : 
Requires more than 360° mechanical adjustment to cause the wiper to traverse the total resistance element.

Terminal : 

An external member that provides electrical access to the resistance element and wiper.

Leadwire Type: (L)

Flexible insulated conductor.

Resistance Element :
A continuous, unbroken length of resistive material without joints, bonds or welds except at the junction of the element and the electrical terminals connected to each end of the element or at an intermediate point such as a center tap.

Adjustment Shaft :

The mechanical input member of a trimming potentiometer which when actuated causes the wiper to traverse the resistance element resulting in a change in output voltage or resistance.

Single Turn Adjustment :

Requires 360° or less mechanical input to cause the wiper to traverse the total resistance element.

For more products information please check: http://www.kingtronics.com/trimming-potentiometers/

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar

<< 2024-3 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31