DC spark-over voltage:The voltage at which the ceramic gas discharge tube sparks over with gradully increasing DC voltage.

Impulse spark-over voltage: The highest voltage at which the ceramic gas discharge tube sparks over with given ware-shape at a rise speed 1000V/μs, and it is also called as “pulse voltage".

Holdover voltages : The maximum DC voltage across the terminals of a ceramic gas discharge tube under which it may be expected to clear and to return to the high impedance state after the passage of a surge, under specified circuit conditions.

Alternating discharge current : The r.m.s. value of an approximately sinusoidal alternating current passing through the ceramic gas discharge tube.

Impulse discharge current: The peak value of the impulse current passing through the ceramic gas discharge tube, and it is also called as pulse discharge current or surge discharge current, including 10/1000μs long-wave discharge current and 8/20μs short-wave discharge current.

Insulation resistance:DC resistance of the gas discharge tube under specified conditions. Test voltage must be lower than DC spark-over voltage.

Inter-electrode capacitance : The capacitance between any two electrodes in the gas discharge tube. Its value is mainly determined by the size of electrode and distance between electrodes. In addition, the capacitance is also related to the lead wire length, spacing and dielectric in the ceramic gas discharge tube.

Kt Kingtronics shares you Bridge Rectifiers common Symbols and Terms. Please check it in the below table, it may be useful for you.

Symbols and Terms

Io

Average forward current

IF

Forward current

IFSM

Forward current, surge peak

IFRM

Repetitive peak forward current

VF

Forward voltage

VR

Reverse voltage

VRRM

Repetitive peak reverse voltage

VRWM

Working peak reverse voltage

VBR

Reverse breakdown voltage

Vz

Zener voltage

Vc

Clamping voltage

IR , IL

Reverse leakage current

Iz

Zener current

IBR

Reverse breakdown current

Ipp

Peak pulse current

CT

Capacitance between terminals

trr

Reverse recovery time

RθJA

Thermal resistance junction to ambient air

PD

Power dissipation

Ppp

Peak pulse power

Tj

Junction temperature

TSTG

Storage temperature

IZK , IZT

Reverse current

ZZK , ZZT

Zener impedance @IZK, IZT

If you want to get more knowledge, welcome to contact our sales, we are willing to help you and we are at your service all the time.

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar

<< 2024-4 >>

Sun

Mon

Tue

Wed

Thu

Fri

Sat

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30