Axial type Aluminum Electrolytic Capacitors is one of Kingtronics hot product line.

It is widely used in many field include :
¬Automotive electronics such as air conditioning system, head-up display, audio-video system, car battery management system, digital driving recorder
¬General purpose and industrial, automotive, telecommunication
¬Coupling, decoupling, timing, smoothing, filtering, buffering in SMPS
¬Boards with restricted mounting height, vibration, and shock resistant

Below are our standard spec. of Axial type with 85°C and 105°C
For more product, please check our product page from below link.
https://www.kingtronics.com/aluminum-electrolytic-capacitors/

※ GKT-AT 105°C 1000H Features
¬Long load life: 105℃ 1000 hours assured
¬Operating temperature range: -40℃~+105℃
¬Wide range capacitance: 3.3uF – 22,000uF
¬Voltage range: 10 ~ 63 WV
¬Low Voltage, 2 Rubber Type
¬ISO/RoHS certified quality

※ GKT-AV 85°C 2000H Features
¬Long load life: 85℃ 2000 hours assured
¬Operating temperature range: -40℃~+85℃
¬Wide range capacitance: 3.3uF – 22,000uF
¬Voltage range: 6.3 ~ 160 WV
¬Various dimensions: 8*16mm ~ 25*53mm
¬Low Voltage, 2 Rubber Type
¬ISO/RoHS certified quality

Kingtronics Widely use Axial type Aluminum Electrolytic Capacitors

In the use of chip MLCC, many customers will encounter capacitor cracking, short circuit, burning and other phenomena, so how to deal with these phenomena?
First of all, we need to know the causes of these phenomena.

A. Crack (refers to the crack on the capacitor that causes the product to fail to work normally). This phenomenon is generally caused by low resistance.
The reasons are as follows.

1. PCB is mostly open circuit after external force.
2. If the non-capacitor body is impacted by external force, it may have short circuit or low resistance.
3. Too high applied stress voltage will lead to MLCC capacitor failure, generally short circuit or low resistance, but this kind of phenomenon should not be much in the case of sufficient allowance.

In this case, it is generally necessary to check whether the product will be vibrated or shaken when working, and then check whether the product capacity meets the requirements.
B. Short circuit burn out (refers to the damage of the capacitor in the PCB board, resulting in the failure of the product to continue to work).

The reasons for this phenomenon are as follows.
1. The model of capacitor package is not big enough;
2. Insufficient reserved allowance;
3. The voltage withstand is too low or the product current is too high.

If this happens, we need to replace the chip capacitor model and check the specific reason. Then choose to replace the chip capacitor capacity or model.
If you can't find a suitable model to replace, you can use the capacitors in parallel or series to solve the problem.

Kingtronics can support you with qualified chip MLCC.
Welcome to share us your demand !

Surface Mount MLCC Capacitors(Multilayer Ceramic Capacitors)

SERIES

KINGTRONICS DESCRIPTION

CAP. RANGE

VOLT. RANGE (DC)

TEMP. RANGE (°C)

LKT

Chip MLCC Capacitors(Multilayer Ceramic Capacitors)

0.1pF ~ 10uF

4VDC to 50VDC

NPO, X7R, Y5V,

HKT

High Voltage Chip MLCC Capacitors

0.5pF - 1µF

63VDC to 4000VDC

NPO, X7R

BKT

High Q Low ESR RF Multilayer Ceramic Capacitors

0.1pF - 6800pF

250VDC to 7200VDC

COG

Kt Kingtronics Introduces Causes of Poor Chip MLCC

Kingtronics’ Polymer Aluminum Electrolytic Capacitors have the characteristics of low ESR, low impedance, and large permissible ripple current.

Besides, the temperature characteristics are also very stable, and it has excellent performance in terms of blog absorption, smoothness, and transient response.

Below is our product line for Polymer E-cap, welcome check our best offer for you. 😊

Series name

Type

Rated Voltage

Operating Temperature

Features

GKT-AS 105°C 2000 hrs Standard low ESR

Radial type

2.5V~ 25V.DC

 -55~+105

Standard series, Low ESR at high frequency range

GKT-AR 105°C 2000 hrs Super low ESR

Low ESR series, Super Low ESR at high frequency range

GKT-AP 105°C 2000 hrs low ESR

SMD Type

2.5V - 100V.DC

Low ESR Series, lead free reflow soldering condition at 250 peak correspondence, miniaturized


Kingtronics-Offer-of-Polymer-Aluminum-Electrolytic-Capacitors

Super capacitor is an electrochemical capacitor with the ability to store more energy than conventional capacitors. Super capacitors can charge and provide energy faster than batteries. The increasing application of instantaneous standby power supply promotes the demand for super capacitor.

The remarkable advantage of super capacitor is that it can cycle thousands of times before aging, while the battery can only cycle hundreds of times.
The latest development of super capacitor has introduced lithium-ion hybrid capacitors which can be charged to high voltage (up to 4V), which has less self-discharge and high energy density. The disadvantage of these super capacitors is that they cannot discharge to less than 2.2V, otherwise they will be damaged.

The composition of super capacitors makes their self-discharge rate significantly higher than that of battery. The higher the working temperature of super capacitor, the higher the charging voltage, the faster the aging; The capacitance of super capacitor will decrease and the equivalent series resistance (ESR) will increase. This means that the super capacitor can provide less energy for the application. ESR of capacitor increases power loss of the system.

The temperature is only 10% higher, the life of the super capacitor can be reduced by half. In addition, it is usually used to charge the super capacitor to a voltage below the nominal voltage to increase its life.

Since the maximum voltage of the super capacitor charging is between 2.7V and 3V, it is necessary to connect several super capacitors in series for most applications. Therefore, the super capacitor must be balanced; Otherwise, one unit may charge more than another, leading to the aging of unequal capacitors, reducing the capacity of capacitor banks to provide the energy required for application.

The methods used to balance the super capacitor include: passive balance of resistor string, switch resistor, zener diode and active balance. The first three methods can cause power loss in resistors, and the fourth is the most effective but also the most expensive.

When super capacitors are used for standby power applications, their capacitors and ESRs must be monitored to ensure that the minimum energy required for the application can be provided.

Super Capacitor applications: RAM; Detonator; car recorder; smart meter; Vacuum switch; digital camera; motor drive; clock circuit; UPS; toy; program-controlled switch; etc.

Kt Kingtronics Sharing More Information about Super capacitor with You

Contact us

Tel: (86) 769 8118 8110
Tel: (852) 8106 7033
Fax: (852) 8106 7099
E-mail: info@kingtronics.com
Skype: kingtronics.sales
MSN: kingtronics-sales@hotmail.com
Web: www.Kingtronics.com
YouTube: www.youtube.com/c/Kingtronicskt

About

Kingtronics International Company was established in 1995 located in Dongguan City of China to handle all sales & marketing for factories located in Chengdu, Sichuan and Zhaoqing, Guangdong, China. In 1990, we established the first factory to produce trimming potentiometer and in 1999 we built up new factory in Zhao Qing, Guangdong. Now with around 850 workers, Kingtronics produce trimming potentiometers, dipped tantalum capacitors, multilayer ceramic capacitors, and diode & bridge rectifier. We sell good quality under our brand Kingtronics, and Kt, King, Kingtronics are our three trademarks. All our products are RoHS compliant, and our bridge rectifier have UL approval. Please visit our Products page, you could please download all our PDF datasheet and find cross reference for our Trimming Potentiometer and capacitors.

Tantalum and Ceramic Capacitors Cross Reference ↓ Download
Diodes & Rectifiers List(PDF: 97KB) ↓ Download
Trimming Potentiometer Cross Reference ↓Download

Archives

Calendar